Cousins 4100H-FS Hercules FS Stretch Wrap System - 40 Loads

Cousins 4100H-FS Hercules FS Stretch Wrap System - 40 Loads

Item # XCP4100HFS

  • Super Rapid Thread ll[TM] 20" capacity pre-stretch film carriage.
  • Electrical input requirements: 115 volts, 1 phase, 60 Hz, 20 amps
  • Production speed: 1-40 loads per hour
  • Maximum load size: 56" W x 56" L (79" max load diagonal) x 80" H (plus up to 4" top overlap)
  • Maximum load weight: Unlimited (floor supported)
  • Fixed stretch capability: 33 to 313%
40 Loads, ea
Manufacturers Item #4100H-FS

Notice: Freight is not included in price.


  • Simple to operate.
  • Panasonic PLC with Touchscreen Operator Interface.
  • Power off - on - reset switch and power on indicator light.
  • Single button auto wrap cycle start/pause.
  • Cycle pause for applying top sheets.
  • Base or top wraps first program.
  • Reinforce wrap control for mid-wrapping.
  • Up only or up/down wrap program.
  • Emergency stop button.
  • Rotary arm jog switch.
  • Film carriage lower/raise switch.
  • Film tension (Force-to-Load) control.
  • Separate film carriage raise and lower speed controls.
  • Variable rotary arm speed control.
  • Rotary arm and carriage elevator dynamic braking system.
  • Triple beam type auto load height sensing photo-eye, detects dark or shiny loads.
  • Separate 1 to 12 revolution top and bottom wrap control.
  • NEMA 12 control panel enclosure.
  • A-B-C wrap program selector with capability to input and store unique wrapping parameters for each program.
  • Dust tight slip ring assembly.
  • Non-proprietary CL/CSA approved components.
  • All structural steel construction.
  • Integral structural steel wall/floor mounting stand.
  • Electro-static powder coated paint finish.
  • Rotary arm obstruction emergency safety stop sensor.

Rotary Arm

  • 20" diameter ring bearing support.
  • ANSI #60 direct chain drive c/w chain tensioner.
  • 3-15 RPM rotational speed c/w soft start acceleration.
  • Final revolution deceleration and positive stop alignment.
  • 3/4 HP DC variable speed motor.

Film Carriage Elevator

  • 1/2 HP DC variable speed motor.
  • ANSI #40 direct chain drive c/w shock dampener.
  • Maintenance free 12 point carriage guidance system.

Film Delivery System

  • Special film threading device uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
  • 1/2 HP DC variable speed motor.
  • Fully electronic dynamic dancer corner compensation.
  • Pre-stretch ratio variable by easy sprocket change.
  • Rapid Thread[TM] Safety Door with auto power cut-off switch.
  • Superior film-to-roller contact area.
  • Lifetime warranty on pre-stretch rollers.